American Steel Carports Inc. Call 405-381-4373 Click here for home page

Serving California. (North of La County)


click for full view and sizes


click for full view and sizes


click for full view and sizes


click for full view and sizes

click for carport page 1


use tool bar on left side of page to see different products available

click for partial enclosure page 1
click for carport page 2 click for partial enclosure page 2
click for carport page 3 (RV Cover) click for partial enclosure page 3
click for partial enclosure page 4

You can add a roll-up door on a side for $200 per door extra, plus price of door.  When doing a roll-up door on side, leg height needs to be 1 ft taller than door height. Units with 12 gauge tubing comes with a limited 20 year warranty, 14 gauge comes with none.  Leg heights go up to 12 feet on carports and 14 feet on enclosures.
You can figure any size of an enclosure with this page. All structures with American Steel are certified, which means they have an engineers stamp. They can be built to meet all city codes where there are requirements for snow load and wind ratings. Temporary rebar stakes are used for ground setting. It is HIGHLY recommended to either set on concrete slab or peers, or use mobile home anchors (see options below on price). You can also use concrete peers that are installed "after the fact" ask our reps to explain. Ground must be level, or it is installed AS-IS. For ease, print out this page. These prices are good for Minnesota. Prices include installation.
On a "Boxed Eve type" or A-frame with Vertical metal, call rep for price quote. Note. Boxed eves come with 6 ft as standard legs, but that is actual height of side The metal is placed vertically not horizontally. All prices have to be approved by install yard.
Fill out order form and fax it to 405-381-4386 only after talking to our reps at 405-381-4373

2 1/2 inch sq tubing 14 gauge standard height= 5 feet. actual height is 1 ft greater than leg

12X21= $895 18X21= $995 20X21= $1395 22X21= $1695 24X21= $1895
12X26= $1295 18X26= $1495 20X26= $1795 22x26= $2195 24X26= $2395
12X31= $1495 18X31= $1795 20X31= $2095 22X31= $2595 24X31= $2895
12X36= $1795 18X36= $2095 20X36= $2495 22X36= $2995 24X36= $3395
12X41= $1995 18X41= $2395 20X41= $2795 22X41= $3395 24X41= $3795

2 1/4 inch square tubing 12 gauge standard height= 6 feet. actual height is 1 ft greater than leg

12X21= $1295 18X21= $1395 20X21= $1595 22X21= $1895 24X21= $2095
12X26= $1695 18X26= $1795 20X26= $1995 22X26= $2395 24X26= $2695
12X31= $1995 18X31= $2095 20X31= $2395 22X31= $2895 24X31= $3142
12X36= $2295 18X36= $2495 20X36= $2795 22X36= $3395 24X36= $3695
12X41= $2595 18X41= $2795 20X41= $3195 22X41= $3795 24X41= $4195
Lengths longer than 41 feet can be achieved by 2 or more placed end to end. Add $100 more for that.  It is recommended to over-lap metal sheets 2 feet. Leg heights go up to 14 feet on enclosures and 12 feet on carports.  On buildings that are over 8 legs or 22 feet wide, we recommend extra bracing. 

Leg heigh
 21 ft long 


26 ft long


31 ft long


36 ft long


41 ft long

add1  ft  $60

$70

$80

$90

$100

add 2 ft  $120 $140 $160 $180 $200
add 3 ft  $180 $210 $240 $270 $300
add 4 ft  $240 $280 $320 $360 $400
add 5 ft  $300 $350 $400 $450 $500
add 6 ft  $360 $420 $480 $540 $600
add 7 ft  $420 $490 $560 $630 $700

Close in both sides

5 ft  $375 $470 $560 $655 $750
6ft   $375 $470 $560 $655 $750
7 ft  $440 $550 $660 $770 $880
8 ft  $440 $550 $660 $770 $880
9 ft   $500 $625 $750 $875 $1000
10 Ft  $660 $825 $990 $1155 $1320
11 ft  $725 $885 $1050 $1250 $1450
12 ft  $790 $990 $1190 $1385 $1580

Close in one end (double price for both)

12 wide

18 wide 20 wide 22 wide 24 wide
5 ft     $400 $500   $600  $700  $800
6 ft     $400 $500   $600  $700  $800
7 ft     $485 $585   $685  $785  $885
8 ft     $495 $595   $695  $795  $895
9 ft     $505 $605   $705  $805  $905
10 ft   $590 $690   $790  $890  $990
11 ft  $600 $700   $800  $900  $1000
12 ft  $610 $710   $810  $910  $1010

1 Gable end  $150 each end up to 24 feet wide

Extra panels Garage doors (roll up) Anchors/Braces
21 ft long  $90
26 ft long  $115
31 ft long  $140
36 ft long  $175
41 ft long  $220
8X6 ft     $350
9X7 ft     $400
10X8ft    $450
10X10 ft $500
Mobile home type anchors $30 each (21 ft needs 4 anchors)
concrete wedge bolts $8 each
2 ft braces $8
4 ft braces $13

Walk in door 36 inch $200
Mobile home type

Extra frame bows $100 - $175 each
for each ft desired height, add $10 per ft
Windows $175 each 30X30
We are a franchised dealer for American Steel Carports Inc. using the internet to sell buildings and carports. We have simplified the process and made it simple to purchase a metal structure. Taxes are applicable on all buildings and carports. Use the tax rate in your area. Buildings can be certified and are done so on a state by state basis. This does add to the total price of a structure. . If set on ground, or anything other than concrete or concrete peers, this Dealer recommends using a concrete peer system to add to what American Steel does on their anchoring system. They use rebar-stakes through the tubing into the ground. This is temporary  in most cases. It depends on your soil type and surrounding area. If you use the optional mobile home anchors, it is normally sufficient.. Our reps can explain a concrete peer system to you. In other states, we use multiple companies to sell buildings and carports . Snow load varies from state to state and can be constructed to sustain 50 pounds per sq ft. Wind rating is normally over 90 mph however this is no guarantee.  All prices have to be approved by installing yard and are subject to change.

 

 

 

 

 

 

 

 

 

 

 

disclaimer and policy

 

Hit Counter