Call 405-381-4373 www.bestbuymetalproducts.com 

Homeland Metal covering parts of Texas, Louisiana and Oklahoma. Homeland Metal offers corner braces as well as J-trim as an option. In areas that are not covered by Homeland Metal, we use other companies. Prices do vary, call our office for a  price quote in your area.
Add up to $360 for A-Frame style buildings
Add up to $360 for power bars up to 40 ft long 

Prices include Installation for Homeland Metal.  
Numbers shown represent width by length. Units longer than 40 ft length can be achieved by placing 2 units "end-to-end" extra labor charge applies. You can figure any size building using these prices. Print off page for ease! 26 gauge sheet metal is also available in some areas. 

12 x 20 = $695 12 x 24 = $995 12 x 28 = $1195 12 x 32 = $1395 12 x 36 = $1595 12x40 =$1795
18 x 20 = $795 18 x 24 = $1295 18 x 28 = $1495 18 x 32 = $1695 18 x 36 = $1895 18x40 =$2095
20 x 20 = $1095 20 x 24 = $1495 20 x 28 = $1695 20 x 32 = $1895 20 x 36 = $2095 20x40 =$2295
22 x 20 =$1295 22 x 24 = $1695 22 x 28 = $1895 22 x 32 = $2095 22 x 36 = $2295 22x40 =$2495
24 x 20 = $1395 24 x 24 = $1795 24 x 28 = $1995 24 x 32 = $2195 24 x 36 = $2395 24x40 =$2595
30 x 20 = $2395 30 x 24 = $2795 30 x 28 = $3295 30 x 32 = $3795 30 x 36 = $4295 30x40 =$4595
Add for leg height  5 ft is standard height on regular style unit. Actual sides are about 1 ft taller than the leg height. A-Frame comes standard with 6 ft legs, but that is the actual height. On legs over 7 ft, we recommend adding Power-Bars Click for Picture. They add a lot to the overall structural integrity of the building. Priced up to $400
20  ft long
6 ft  $55
7ft   $100
8ft   $145
9ft   $190
10ft  $235
11ft $280
24  ft long
$70
$130
$190
$250
$310
$370
28  ft long
$80
$145
$210
$275
$340
$405
32  ft long
$90
$160
$230
$305
$370
$440
36 ft long
$105
$185
$265
$345
$425
$505
40 ft long
$125
$210
$295
$380
$465
$550

Close both sides 

5 ft    $345
6ft     $395
7ft     $445
8ft     $495
9ft     $545
10ft   $595
11ft   $645
$425
$480
$535
$590
$645
$700
$755
$500
$560
$625
$685
$745
$805
$865
$565
$630
$695
$760
$825
$890
$955
$650
$725
$795
$865
$935
$1010
$1115
$740
$815
$890
$965
$1040
$1115
$1190

Close one end (double for front and back)

12 wide
5 ft    $435
6 ft    $480
7 ft   $505
8 ft   $560
9 ft   $600
10 ft $645
11 ft $730
18 wide
$455
$515
$575
$635
$695
$755
$850
20 wide
$535
$600
$670
$735
$800
$865
$950
22 wide
$620
$690
$760
$835
$905
$980
$1090
24 wide
$710
$790
$855
$930
$1010
$1085
$1210
30 wide 6ftstandard
N/A
$990
$1020
$1060
$1260
$1360
$1515

Partial Gable

12 wide $145, 18, 20, 22 and 24 $170 and 30 wide $270

Roll up
door sizes available (width x height)

Power Bars
Up to $360

Walk through doors available

 6 x 7 =$330
 8 x 7 = $ 395
 8 x 10 = $ 525

extra metal
20 ft sheet   $95
24 ft            $110
28 ft           $120
32 ft           $130
36 ft         $145
40 ft           $160

3 ft door $235 4 ft door $285
  9X7  = $455
10 x 7 = $515
 9X10 =   $585
10 x 10 = $ 645
12x12 =$1295

window sizes available

additional bow braces 24 " = $35 per bow

27 inches wide by 30 inches tall $150

Units can be ordered longer than 40 feet by using multiple units and placing them end to end and overlapping the metal sheets on the roof. You loose a minimum of 1 foot due to the overlapping. (prefer 2 ft overlap) There is a labor charge for connecting units together and they are not guaranteed against leaks.
example: using (2) 20 x 24  units end to end will achieve an overall length of 46 feet in length. If installed on anything other than concrete slab, this Dealer recommends adding concrete piers after the installation. Our sales staff can explain.

Prices are subject to change and must be approved by installing yard.

 

 

 

 

 

 

 

 

disclaimer and policy